It appears that your cart is currently empty
Norton & Carborundum
NORTON, EZ-REPAIR PLASTIC/BUMPER...
EZ-REPAIR PLASTIC/BUMPER 5 MINUTE 1:1 220ml EZ REPAIR 5 minutes #055395-99401 Two-part urethane (...
EZ-REPAIR PLASTIC/BUMPER 5 MINUTE 1:1 220ml EZ REPAIR 5 minutes #055395-99401 Two-part urethane (1:1) adhesive used for structural and cosmetic repairs of all plastic bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs including TPE, TPO, TEO, PP ...
$44.00
NORTON, EZ-REPAIR MULTI-USE REP/...
EZ-REPAIR MULTI-USE REP/BOND 15 MINUTE 1:1 220ml EZ REPAIR 15 minutes #055395-99402 Two-part ur...
EZ-REPAIR MULTI-USE REP/BOND 15 MINUTE 1:1 220ml EZ REPAIR 15 minutes #055395-99402 Two-part urethane (1:1) adhesive used for installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, head lamp buckets and other body pa...
$44.00
NORTON, EZ-REPAIR METAL PANEL WE...
EZ-REPAIR METAL PANEL WELD/BOND ADHESIVE 75MIN 2:1 220ml Times will increase as temperatures decr...
EZ-REPAIR METAL PANEL WELD/BOND ADHESIVE 75MIN 2:1 220ml Times will increase as temperatures decrease. Times shown above are at 70°F/21°C. EZ REPAIR adhesives SHOULD NOT be used for bonding structural components such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is ...
$41.00
NORTON, EZ-REPAIR METAL DOOR SKI...
EZ-REPAIR METAL DOOR SKIN BOND ADHESIVE 45MIN 2:1 220ml Times will increase as temperatures decre...
EZ-REPAIR METAL DOOR SKIN BOND ADHESIVE 45MIN 2:1 220ml Times will increase as temperatures decrease. Times shown above are at 70°F/21°C. EZ REPAIR adhesives SHOULD NOT be used for bonding structural components such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a...
$38.00
NORTON, EZ-REPAIR EPOXY MULTI-BO...
EZ-REPAIR EPOXY MULTI-BONDER 2:1 (NO PRIMER REQUIRED) Times will increase as temperatures decreas...
EZ-REPAIR EPOXY MULTI-BONDER 2:1 (NO PRIMER REQUIRED) Times will increase as temperatures decrease. Times shown above are at 70°F/21°C for 99403 and 77°F/25°C for 99406. Full cure time is 24 hours but this may be accelerated with heat RESISTANCE SPOT WELDING: Recommend resistance welding through ...
$43.00
NORTON EZ-REPAIR SEAM SEALER 1:1...
EZ-REPAIR SEAM SEALER 1:1 220ml PAINTABLE Seam Sealer Two-part epoxy (1:1) used to seal interior ...
EZ-REPAIR SEAM SEALER 1:1 220ml PAINTABLE Seam Sealer Two-part epoxy (1:1) used to seal interior and exterior seams, joints and voids. It will not shrink, harden or crack and retains its flexibility. For use on vertical or horizontal seams. • Paintable in 30 minutes • Will not shrink or crack • M...
$35.50
NORTON, EZ-REPAIR BARE METAL SEA...
EZ-REPAIR BARE METAL SEAM SEALER 1:1 200ml Paintable in 45 minutes Can be used over bare or prim...
EZ-REPAIR BARE METAL SEAM SEALER 1:1 200ml Paintable in 45 minutes Can be used over bare or primed meta Will not shrink or crack Non-sagging, non-flowing sealer Matches OEM seams Material Resin Brand Carborundum Item Weight 7.4 Ounces Compatible Material Metal
$36.00
NORTON, EZ-REPAIR ADHESION PROMO...
EZ-REPAIR ADHESION PROMOTER SPRAY Adhesion Promoter EZ REPAIR Adhesion Promoter is available in b...
EZ-REPAIR ADHESION PROMOTER SPRAY Adhesion Promoter EZ REPAIR Adhesion Promoter is available in both aerosol and brush top. No need to identify plastic type – just simply apply to all plastics once, no need to re-apply. Allow for a 10 minute flash time. • No plastic identification required.
$11.50
NORTON, ZINC-RICH WELD-THROUGH P...
ZINC-RICH WELD-THROUGH PRIMER Zinc-Rich Weld-Through Primer Aerosol primer for use on bare metal ...
ZINC-RICH WELD-THROUGH PRIMER Zinc-Rich Weld-Through Primer Aerosol primer for use on bare metal parts before welding. This zinc rich primer provides excellent conductivity to minimize weld spatter. It is fast drying, resists sags and settling, is water resistant after 15 minutes, and may be topc...
$17.00