It appears that your cart is currently empty
EZ-REPAIR PLASTIC/BUMPER 5 MINUTE 1:1 220ml
EZ REPAIR 5 minutes #055395-99401 Two-part urethane (1:1) adhesive used for structural and cosmetic repairs of all plastic bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs including TPE, TPO, TEO, PP and ABS and can also be used to bond SMC or fiberglass panels. • One product for all structural and cosmetic repairs on bumpers • Easy to sand to a feather edge • Good for elevated temperatures • Will not lift or roll up • No plastic identification required with use of 99410 / 99411 adhesion promoter • Accelerate cure with heat (3 min @ 140°F)
DO NOT APPLY POLYESTER BASED FILLERS (POLYESTER PUTTY/FILLER) TO ANY URETHANE EZ REPAIR ADHESIVE. IF POLYESTER BASED FILLER MUST BE USED, THE URETHANE EZ REPAIR MUST BE SEALED WITH ONE OF THE FOLLOWING: PRIMER (EITHER 2 PART EPOXY OR 2 PART URETHANE OR SKIM COAT OVER THE EZ REPAIR REPAIR AREA USING EZ REPAIR SKIM COAT EPOXY REPAIR/FILLER ADHESIVE #99403). All are 220ml, 1:1 cartridges.
Applications: Repairs bumper tabs, trim, and small plastic parts. Bonds plastic parts to plastic and coated metals. Repairs tears and holes on bumpers, trim, moldings, etc.