It appears that your cart is currently empty
FUSOR DTM ADHESIVE SEALANT CAULK NEUTRAL 10oz
Fusor® 800DTM/801DTM/803DTM direct-to-metal sealer is a one-component, moisture-cure product used for duplicating factory appearance on standing seams and cosmetic seams in automotive collision repair and industrial heavy duty truck, bus and trailer repair. Typical applications include: truck bed seams, trailer sidewall and window sealing, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required.
Fusor adhesive/sealant is available in the following colors:
• Neutral – Fusor 800DTM Sealer = 10 oz (296 mL)
• White – Fusor 801DTM Sealer = 10 oz (296 mL)
• Black – Fusor 803DTM Sealer = 10 oz (296 mL)
Shelf life is 15 months when stored in a well ventilated area at or below 80°F (27°C) in original, unopened container. Once cartridge has been opened, leave the dispense tip on to act as a seal against moisture.
Bare Metal, Cold rolled steel, E-coat, Aluminum
Ford, GM, Honda/Acura, Nissan, Volvo Truck
Durable – creates high strength bonds with or without primer; exhibits excellent primerless adhesive properties.
Convenient – single component requires no mixing; skins over quickly at room temperature, reducing cycle time.
Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility
Easy to Use – easily dispensed; can be tooled and/or painted immediately.
Excellent Appearance – duplicates all types of OEM seals; holds brush marks without die back; weld-through with no burn back.
Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.
Temperature Resistant – uncured material can endure 225°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect.
Environmentally Resistant – resists weathering and aging; provides excellent resistance to indirect UV exposure.
Duplicates factory seams where a non-sag, toolable/brushable seam sealer is required.
Appearance | Neutral, White or Black Paste |
Base Chemistry | Silane Terminated Polymer (STP) 1K |
Skin Time** | 25 minutes @ 70°F (21°C), 50% RH |
Paint Time | Immediately; Up to 30 days without a scuff |
Cure Time | 72 hours @ 70°F (21°C) |
*Data is typical and not to be used for specification purposes.
**Varies with temperature/humidity.