It appears that your cart is currently empty
Equipment/Hardware / Air Tools
Milton® 1/8" Compressor Tank Dra...
1/8IN DRAIN COCK(=320D) Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain...
1/8IN DRAIN COCK(=320D) Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is drained. Always release air from tanks before replacing drain cock. Drain cock body is brass, handle is steel. R...
$3.00
Milton® 1/4" FNPT 1/4" ID Swivel...
1/4F SW END 1/4 HSE(=209AS4B) 1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings a...
1/4F SW END 1/4 HSE(=209AS4B) 1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured...
$2.50
Milton® 1/4" NPS Swivel Hose End...
1/4F. SW. END 1/4 HOSE(209ASF44) These 1/4" NPS brass female swivel hose ends are used to assembl...
1/4F. SW. END 1/4 HOSE(209ASF44) These 1/4" NPS brass female swivel hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped fe...
$2.50
Milton® 3/8" FNPT 3/8" ID Hose E...
3/8F SOLID END 3/8ID(=209A6C) 3/8" FNPT solid brass hose ends are used to assemble new hoses or r...
3/8F SOLID END 3/8ID(=209A6C) 3/8" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Fits hose...
$4.00
Milton® 1/4" FNPT 3/8" ID Hose E...
1/4 F. END 3/8 ID(=209A6B) 1/4" FNPT solid brass hose ends are used to assemble new hoses or repl...
1/4 F. END 3/8 ID(=209A6B) 1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Fits hoses w...
$3.00
Milton® 1/4" FNPT 5/16" ID Hose ...
1/4 F. END 5/16 ID(=209A5B) 1/4" FNPT solid brass hose end fittings are used to assemble new hose...
1/4 F. END 5/16 ID(=209A5B) 1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished product the hose end should be secured with a crimped ferrule. This set of two hose ends fit a 5/16" hose ID. 1/4" femal...
$2.60
Milton® 1/4" FNPT 1/4" ID Hose E...
1/4 FEM END 1/4 HOSE(=209A4B) 1/4" FNPT solid brass hose end fittings are used to assemble new ho...
1/4 FEM END 1/4 HOSE(=209A4B) 1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished product the hose end should be secured with a crimped ferrule. This set of two hose ends fit a 1/4" hose ID. 1/4" fema...
$2.50
Milton® 3/8" MNPT 1/2" ID Hose E...
3/8M END 1/2 ID HOSE(=201A8C) 3/8" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose ...
3/8M END 1/2 ID HOSE(=201A8C) 3/8" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should ...
$3.00