It appears that your cart is currently empty
Equipment/Hardware / Air Tools / Hoses & Fittings
Milton® 3/8" ID Hose Mender Fitt...
HOSE MENDER 3/8(=HM6) These brass hose menders are made for a 3/8" ID hose. Brass hose fittings a...
HOSE MENDER 3/8(=HM6) These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured...
$2.50
Milton® 5/16" ID Hose Mender Fit...
HOSE MENDER 5/16(=HM5) 5/16" brass hose mender fittings are used to assemble new hoses or replace...
HOSE MENDER 5/16(=HM5) 5/16" brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends have ...
$2.50
Milton® 1/4" ID Hose Mender Fitt...
HOSE MENDER 1/4(=HM4) 1/4" ID hose mender brass hose fittings are used to assemble new hoses or r...
HOSE MENDER 1/4(=HM4) 1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends...
$3.00
Milton® Reusable Brass Hose Mend...
REUSABLE MENDER 1/4 X9/16 Reusable hose end fittings can be used again and again and are an easy ...
REUSABLE MENDER 1/4 X9/16 Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID, 9/16" OD or 19/32" OD. 1/4" hose inside diameter 9/16" or 19/32" hose outside diameter Maximum pressure of 250 pounds per square i...
$7.50
Milton® 1/4" MNPT Reusable Hose ...
HOSE END 1/4 X 9/16 Maximum air pressure of 250 pounds per square inch 1/4" MNPT reusable hose e...
HOSE END 1/4 X 9/16 Maximum air pressure of 250 pounds per square inch 1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a Maximum air pressure of 250 PSI.
$4.80
Milton® 3/8" Compressor Tank Dra...
3/8 IN DRAIN COCK 3/8" MNPT drain cock is a replacement part for damaged drain cocks on compresso...
3/8 IN DRAIN COCK 3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is drained. Always release air from tanks before replacing drain cock. Drain cock body is brass, handle is steel. Replaces damaged dra...
$5.60
Milton® 1/4" Compressor Tank Dra...
(6144M)1/4 IN. DRAIN COCK(=321D) 1/4" NPT drain cocks are a replacement part for damaged drain co...
(6144M)1/4 IN. DRAIN COCK(=321D) 1/4" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is drained. Always release air from tanks before replacing drain cock. Drain cock body is brass, handle is steel. 1/4"...
$3.00
Milton® 1/8" Compressor Tank Dra...
1/8IN DRAIN COCK(=320D) Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain...
1/8IN DRAIN COCK(=320D) Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is drained. Always release air from tanks before replacing drain cock. Drain cock body is brass, handle is steel. R...
$3.00
Milton® 1/4" FNPT 1/4" ID Swivel...
1/4F SW END 1/4 HSE(=209AS4B) 1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings a...
1/4F SW END 1/4 HSE(=209AS4B) 1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured...
$2.50